Restraints
Crash Zone Sensor
In this manual: Restraints
~1min read
Exploded View

| Crash zone sensor | Radiator core support lower | ||||
| : vehicle front | |||||
| : Always replace after every disassembly. | |||||
| : N·m (kg-m, ft-lb) | |||||
Removal and Installation
Before servicing, ignition switch OFF, disconnect 12V battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refer to Precautions for Removing Battery Terminal.
Never use air tools or electric tools for servicing.
REMOVAL
Remove engine under cover front. Refer to Removal and Installation.
Disconnect crash zone sensor harness connector.
Remove crash zone sensor mounting nut, and then remove crash zone sensor.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Was this page helpful?