Restraints

Driver Knee Air Bag Module

~2min read

Exploded View

Steering member Driver knee air bag module
: Always replace after every disassembly.
: N·m (kg-m, in-lb)

Removal and Installation

  • Before servicing, ignition switch OFF, disconnect battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refer to Precautions for Removing Battery Terminal.

  • Always work from the side of air bag module. Never work in front of it.

  • Never use air tools or electric tools for servicing.

REMOVAL

Remove instrument lower panel LH. Refer to Removal and Installation.

Remove driver knee air bag module mounting bolts .

Move driver knee air bag module from steering member, and then disconnect driver knee air bag module harness connector .

Remove driver knee air bag module.

INSTALLATION

Note the following items, and then install in the reverse order of removal.