Restraints

Passenger Air Bag Module

~2min read

Exploded View

Instrument panel assembly Steering member Passenger air bag module
: Clip
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
: Indicates that the part is connected at points with same symbol in actual vehicle.

Removal and Installation

  • Before servicing, ignition switch OFF, disconnect 12V battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refer to Precautions for Removing Battery Terminal.

  • Always work from the side of air bag module. Never work in front of it.

  • Never use air tools or electric tools for servicing.

REMOVAL

Remove instrument panel assembly from steering member. Refer to Removal and Installation.

Disengage passenger air bag module harness connectors fixing clips and .

Remove passenger air bag module fixing screws .

Remove passenger air bag module.Move passenger air bag according arrow direction as shown in figure, and then disengage fixing hooks .

Disengage fixing hooks of passenger air bag according arrow direction as shown in figure, and then remove passenger air bag module from instrument panel assembly.

INSTALLATION

Note the following items, and then install in the reverse order of removal.