Restraints

Satellite Sensor

~2min read

Exploded View

Front door satellite sensor B-pillar satellite sensor C-pillar satellite sensor
: vehicle front
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)

Removal and Installation

  • Before servicing, ignition switch OFF, disconnect 12V battery negative terminal and wait for 3 minutes or more (discharges electricity held in the additional power supply circuit of the air bag diagnosis sensor unit). Refer to Precautions for Removing Battery Terminal.

  • Never use air tools or electric tools for servicing.

REMOVAL

Front Door Satellite Sensor

Remove front door finisher. Refer to Removal & Installation.

Disconnect front door satellite sensor harness connector.

Disengage front door satellite sensor lock pin according numerical order 1→2 indicated by arrows as shown in figure, and then remove front door satellite sensor.

B-pillar Satellite Sensor

Remove front seat belt retractor mounting anchor bolt, and then move front seat belt retractor to secure work space. Refer to Removal & Installation.

Remove B-pillar satellite sensor mounting nut, and then pull out B-pillar satellite sensor.

Disconnect B-pillar satellite sensor harness connector, and then remove B-pillar satellite sensor.

C-pillar Satellite Sensor

Remove luggage side lower finisher. Refer to Removal and Installation.

Remove rear foot duct (RH side). Refer to Removal and Installation.

Disconnect C-pillar satellite sensor harness connector.

Remove C-pillar satellite sensor mounting nut, and then remove C-pillar satellite sensor.

INSTALLATION

Note the following items, and then install in the reverse order of removal.