Suspension

Easy Fill Tire Alert Does Not Activate

3steps
~18min
2/5difficulty
Done 0 of 3

Description

The easy fill tire alert does not function while inflating a tire when the selectposition is in P-range with the ignition switch ON or with the engine started.

Diagnosis Procedure

LOCATION CHANGE

Move the vehicle to other area and repeat the procedure of the easy fill tire alert function. Refer to Easy Fill Tire Alert Function.

Is the function normal?

YES>>

Normal (the tire inflation indicator may not operate, depending on reception condition.)

NO>>

GO TO 2.

PERFORM LOW TIRE PRESSURE MONITORING SYSTEM SELF DIAGNOSTIC RESULT

With CONSULT

  1. Drive for 10 minutes at a speed of 25 km/h or more.

  2. Stop the vehicle.

  3. Perform “Self Diagnostic Result“ for “AIR PRESSURE MONITOR“.

Is any DTCs detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

GO TO 3.

CHECK HAZARD WARNING LAMP OPERATION

Check hazard warning lamp operation with hazard switch.

Does the hazard warning lamp blink?

YES>>

GO TO 4.

NO>>

Perform trouble diagnosis for the hazard warning lamp. Refer to Symptom Table.

PERFORM TCM SELF DIAGNOSTIC RESULT

With CONSULT

Perform “Self Diagnostic Result“ for “TRANSMISSION”.

Is any DTCs detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

GO TO 5.

CHECK HORN OPERATION

Check horn operation.

Is the operation normal?

YES>>

GO TO 6.

NO>>

Repair or replace error-detected parts.

PERFORM BCM SELF DIAGNOSTIC RESULT

With CONSULT

Perform “Self Diagnostic Result” for “BCM”.

Is any DTCs detected?

YES>>

Check the DTC. Refer to DTC Index.

NO>>

Replace BCM. Refer to Removal and Installation.