Suspension

Low Tire Pressure Location Indicator Continues Displaying

2steps
~12min
2/5difficulty
Done 0 of 2

Description

The low tire pressure location indicator continues displaying though low tire pressure warning lamp turns/stays OFF.

Diagnosis Procedure

CHECK TIRE PRESSURE

  1. Ignition switch ON.

  2. Check the tire pressure for all wheels and adjust to the specified value. Refer to TIRE AIR PRESSURE : Service Data.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Inspect or repair the tires or wheels.

CHECK LOW TIRE PRESSURE LOCATION INDICATOR

Check low tire pressure location indicator.

Does low tire pressure location indicator continues displaying?

YES>>

GO TO 3.

NO >>

INSPECTION END

PERFORM SELF DIAGNOSTIC RESULT

CONSULT

Perform self-diagnosis for "AIR PRESSURE MONITOR” of “BCM”.

Is DTC detected?

YES>>

Perform DTC diagnosis procedure. Refer to DTC Index.

NO>>

GO TO 4.

CHECK BCM POWER SUPPLY AND GROUND CIRCUIT

Perform the trouble diagnosis for power supply and ground circuit. Refer to Diagnosis Procedure.

Is the inspection result normal?

YES>>

Replace BCM. Refer to Removal and Installation.

NO>>

Repair or replace error-detected parts.