Ventilation, Heater & Air Conditioner

High-Pressure Pipe

~2min read

Removal and Installation

REMOVAL

Use a refrigerant collecting equipment (for HFO-1234yf) to discharge the refrigerant. Refer to Recycle Refrigerant.

Remove front heater outlet pipe assembly. Refer to Removal and Installation.

Remove front heater pipe assembly. Refer to Removal and Installation.

Remove low-pressure pipe. Refer to Removal and Installation.

Remove reservoir tank and reservoir tank bracket. Refer to RADIATOR : Exploded View.

Remove 12V battery and battery tray. Refer to Removal and Installation.

Remove mounting bolt , and then disconnect high-pressure pipe from condenser outlet pipe.

Remove high-pressure pipe from tube clips 1 .

: vehicle front

Disconnect engine No.2 harness connectors and .

: vehicle front

Remove mounting bolt , and then remove ground wire.

: vehicle front

Remove mounting nut , and then disconnect engine No.2 harness from engine room harness.

Disengage fixing pawl, and then move engine No.2 harness to secure work space.

: Pawl
: vehicle front

Disconnect high-pressure pipe from rear cooler pipe assembly.

Remove high-pressure pipe from tube clip 2 .

Disconnect high-pressure pipe from front expansion valve.

: vehicle front

Remove high-pressure pipe from vehicle.

INSTALLATION

Note the following items, and then install in the reverse order of removal.