Rear Cooler Pipe Assembly
Removal and Installation
REMOVAL
Use a refrigerant collecting equipment (for HFO-1234yf) to discharge the refrigerant. Refer to Recycle Refrigerant.
Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Separate frame assembly and body assembly. Refer to Removal and Installation.
Disconnect front heater pipe assembly from rear cooler pipe assembly. Refer to Removal and Installation.
Disconnect low-pressure pipe from rear cooler pipe assembly. Refer to Removal and Installation.
Disconnect high-pressure pipe from rear cooler pipe assembly. Refer to Removal and Installation.
Remove mounting bolt
, and then disconnect low-pressure pipe and high-pressure pipe of rear cooler pipe assembly from rear evaporator pipe.

| : vehicle front |
Loosen clamps
, and then disconnect heater hoses of rear cooler pipe assembly from rear heater core.

| : vehicle front |
Remove mounting nuts
, and then remove heat shield plate.

| : vehicle front |
Remove mounting nuts
and bolts
, and then remove rear cooler pipe assembly from body.

| : vehicle front |
INSTALLATION
Note the following items, and then install in the reverse order of removal.