Body Interior

Luggage Side Lower Finisher

~2min read

Removal and Installation

REMOVAL

Remove luggage rear plate. Refer to Removal and Installation.

Release luggage side lower finisher portion of back door weather-strip. Refer to Removal and Installation.

Set second seat to walk-in position.

Remove third seat. Refer to Removal and Installation.

Remove second seat belt anchor plate. Refer to Removal and Installation.

Remove third seat belt anchor plate. Refer to Removal and Installation.

Remove luggage hook.Slide pin part of luggage hook using a remover tool (B) to release fixing pawls of luggage hook.

: Pawl
Remove luggage hook.

Remove rope hooks.Disengage rope hook fixing pawls using a remover tool (A), and then open rope hook cover.

: Pawl
Remove rope hook mounting bolt , and then remove rope hook.

Remove seat switch escutcheon.Apply protective tape (A) on luggage side lower finisher to protect it from damage.

Disengage seat switch escutcheon fixing pawls using a remover tool (A), and then remove seat switch escutcheon.
: Pawl
Disconnect switch harness connector.

Apply protective tapes (A) on luggage side lower finisher to protect it from damage.

Disengage luggage side lower finisher fixing clips and pawls using a remover tool (A) according to numerical order 1→4 indicated by arrows as shown in the figure.

: Clip
: Pawl

Disengage luggage side lower finisher fixing clips and pawls according to numerical order 1→4 indicated by arrows as shown in the figure.

: Clip
: Pawl

Disengage each harness connector, and then remove luggage side lower finisher.

INSTALLATION

Note the following items, and then install in the reverse order of removal.