Body Interior
Rear Pillar Finisher
In this manual: Body Interior
~1min read
Removal and Installation
REMOVAL
Remove luggage side lower finisher. Refer to Removal and Installation.
Apply protective tape (A) on rear pillar finisher to protect it from damage.

Disengage seat belt finisher fixing pawls using a remover tool (A).

| : Pawl |
Apply protective tape (A) on rear pillar finisher to protect it from damage.

Disengage bolt cap fixing pawls using a remover tool (A), and then remove bolt cap.

| : Pawl |
Remove rear pillar finisher mounting bolt.
Disengage rear pillar finisher fixing clip and pawl using a remover tool (A), and then remove rear pillar finisher.

| : Clip | |
| : Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
Was this page helpful?