Suspension

Rear Suspension Assembly

2steps
~12min
3/5difficulty
Done 0 of 2

Inspection

COMPONENT PART

Check the mounting conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.

Ball Joint Axial End Play

  1. Check ball joint boot for cracks or other damage. If there are cracks or other damage, replace suspension arm or front lower link.

  2. Lift the vehicle and vertically swing tires by hand to check if the ball joint has a backlash. If it has a backlash, replace suspension arm or front lower link.

SHOCK ABSORBER

Check for oil leakage and damage. Replace it if necessary.

Oil Leakage Inspection

  • If oil does not extend beyond the spring seat or upper half (C) of strut/shock absorber , this is slight oil seepage and the strut/shock absorber should not be replaced.

  • If oil does extend beyond the spring seat or upper half (C) of strut/shock absorber as shown, perform the following.

    • Use a finger to touch the oil that has extended beyond the spring seat or upper half of strut/ shock absorber.

      • If the oil layer is thick and contains large pieces of dust and debris, replace the strut/shock absorber.

      • If the oil layer is thin and does not contain large pieces of dust and debris, do not replace the strut/shock absorber.