Rear Suspension Service Data and Specifications
Wheel Alignment
WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
| Item | Standard | ||
|---|---|---|---|
Camber Degree minute (Decimal degree) |
Minimum | −0°35′ (−0.58°) | |
| Nominal | −0°05′ (−0.08°) | ||
| Maximum | 0°25′ (0.41°) | ||
| Left and right difference*1 | –0° 45′ (–0.75°) - 0° 45′ (0.75°) | ||
| Toe-in | Total toe-in Distance |
Minimum | Out 0.2 mm (Out 0.008 in) |
| Nominal | In 3.2 mm (In 0.126 in) | ||
| Maximum | In 6.6 mm (In 0.260 in) | ||
Total toe-angle Degree minute (Decimal degree) |
Minimum | Out 0° 01′ (Out 0.01°) | |
| Nominal | In 0° 13′ (In 0.22°) | ||
| Maximum | In 0° 27′ (In 0.45°) | ||
Measure value under unladen*2 conditions.
*1: A difference when assuming the left side a standard.
*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
WITH DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
| Item | Standard | ||
|---|---|---|---|
Camber Degree minute (Decimal degree) |
Minimum | −0°50′ (−0.83°) | |
| Nominal | −0°20′ (−0.33°) | ||
| Maximum | 0°10′ (0.16°) | ||
| Left and right difference*1 | –0° 45′ (–0.75°) - 0° 45′ (0.75°) | ||
| Toe-in | Total toe-in Distance |
Minimum | In 1.0 mm (In 0.039 in) |
| Nominal | In 4.4 mm (In 0.173 in) | ||
| Maximum | In 7.8 mm (In 0.307 in) | ||
Total toe-angle Degree minute (Decimal degree) |
Minimum | In 0° 04′ (In 0.07°) | |
| Nominal | In 0° 18′ (In 0.30°) | ||
| Maximum | In 0° 32′ (In 0.53°) | ||
Measure value under unladen*2 conditions.
*1: A difference when assuming the left side a standard.
*2: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
Ball Joint
| Item | Standard | |
|---|---|---|
| Swing torque | 0.5 – 6,4 N·m | |
| Measurement on spring balance (groove position) | Suspension arm | 7.9 – 53.2 N (0.81 – 5.42 kg, 1.78 – 11.95 lb) |
| Front lower link | 5.9 – 74.5 N (0.61 – 7.59 kg, 1.33 – 16.74 lb) | |
| Rotating torque | Suspension arm | 0.5 – 3,4 N·m |
| Front lower link | 0.5 – 6,4 N·m | |
Wheel Height
WITHOUT DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
Except for Canada
| Item | Standard | |
|---|---|---|
| Wheel size | 18 inch | 20 inch |
| Front (Hf) | 929 mm (36.57 in) | 937 mm (36.89 in) |
| Rear (Hr) | 936 mm (36.85 in) | 945 mm (37.20 in) |
![]() |
||
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
For Canada
| Item | Standard | |
|---|---|---|
| Wheel size | 18 inch | 20 inch |
| Front (Hf) | 929 mm (36.57 in) | 937 mm (36.89 in) |
| Rear (Hr) | 936 mm (36.85 in) | 944 mm (37.17 in) |
![]() |
||
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
WITH DYNAMIC DIGITAL SUSPENSION AND ELECTRONIC AIR SUSPENSION
| Item | Standard | |
|---|---|---|
| Wheel size | 20 inch | 22 inch |
| Front (Hf) | 928 mm (36.54 in) | 928 mm (36.54 in) |
| Rear (Hr) | 935 mm (36.81 in) | 936 mm (36.85 in) |
![]() |
||
Measure value under unladen* conditions.
*: Fuel, engine coolant and lubricant are full. Spare tire, jack, hand tools and mats are in designated positions.
