Air cleaner and air duct
Exploded View

1. Mass air flow sensor 2. Gasket
3. Clamp
4. Air duct (suction side) 5. Clamp
6. Air cleaner cover assembly 7. Mounting rubber
8. Air cleaner filter
9. Air cleaner body assembly 10. Air duct with resonator 11. Grommet
12. Air duct (duct side) 13. Grommet
14. Bracket
15. Mounting rubber
A. To turbocharger
: N·m (kg-m, in-lb)
: Always replace after every
disassembly.
Removal and Installation
REMOVAL
NOTE:
Mass air flow sensor is removable under the car-mounted condition.
8. Remove mass air flow sensor from air cleaner cover, if necessary.
• Never shock the mass air flow sensor. • Never disassemble the mass air flow sensor. • Never touch the sensor of the mass air flow sensor.9. Remove air duct with resonator with the following procedure.
a. Remove fender protector (LH). Refer to EXT-22, "Exploded View".b. Remove air duct with resonator.
INSTALLATION
Note the following, and install in the reverse order of removal.
• Align marks. Attach each joint. Screw clamps firmly. • Fixing clips shall be fixed after inserting air cleaner body assembly protrusion to air cleaner case botch hole.• Make sure whether air cleaner body has been firmly installed by shaking it.
Inspection
INSPECTION AFTER REMOVAL
Inspect air duct and resonator assembly for crack or tear.
• If anything found, replace air duct and resonator assembly.