Exterior
Door outside molding
In this manual: Exterior
~1min read
Exploded View

1. Front door panel
2. Front door outside molding 3. Rear door panel
4. Rear door outside molding 5. Door glass
: Pawl
Front door outside molding
FRONT DOOR OUTSIDE MOLDING : Removal and InstallationREMOVAL
1. Fully open front door glass.2. Twist door outside molding toward the outside of the vehicle, and then lift up and remove it while disengaging the pawls.

INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:When installing front door outside molding, check that pawl (1) is accurately aligned with mounting hole (2), then press in.

Rear door outside molding
REAR DOOR OUTSIDE MOLDING : Removal and InstallationREMOVAL
1. Fully open rear door glass.2. Twist rear door outside molding toward vehicle outside and remove molding while disengaging it from door panel.
: Pawl

3. Slide rear door outside molding (1) toward vehicle front, and then pull molding out from rear door handle (2).

INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:When installing rear door outside molding, check that pawl (1) is accurately aligned with mounting hole (2), then press in.

Was this page helpful?