Exterior
Front grille
In this manual: Exterior
~1min read
Exploded View

1. Bumper fascia assembly 2. Front side grille RH 3. Front center grille
4. Emblem
5. Front side grille LH
: Pawl
Removal and Installation
REMOVAL
CAUTION:When remove front grilles (1) apply protective tape (A) on the bumper fascia (2) to protect the painted surface from damage.

1. Fully open hood assembly.
2. Remove front center grille upper fixing clips (A).
CAUTION:Apply protective tape (B) around bumper fascia
.

3. Disengage fixing pawls from back side while pulling front center grille to wade vehicle front, and then remove front center grille.
: Pawl

4. Remove front side grille (LH and RH) upper fixing clips (A).
5. Disengage fixing pawls from back side of front side grille (LH and RH).
: Pawl
CAUTION:
Apply protective tape (B) around bumper fascia.

6. Remove front side grille (LH and RH) to ward vehicle front.
7. Remove emblem after removing front grille.
INSTALLATION
Install in the reverse order of removal.
Was this page helpful?