Exterior
Sill cover
In this manual: Exterior
~1min read
Exploded View

1. Screw grommet
2. Screw grommet
3. Sill cover
4. Wind defle
Removal and Installation
REMOVAL
1. Remove sill cover front end fixing screw (A).

2. Remove sill cover rear end fixing screw (A).

3. Remove sill cover lower side fixing screws. 4. Fully open front door and rear door.
5. Remove clips from sill cover back side with a remover tool (A).
: Clip
CAUTION:
Apply protective tape (B) on the body to protect the painted surface from damage.

6. Remove sill cover form body side.
INSTALLATION
Note the following item, and then install in the reverse order of removal.
CAUTION:When installing sill cover, check that clips are securely fitted in body panel holes, and then press clips in.
Was this page helpful?