Driver Controls

Front Side Marker Lamp Circuit

5steps
~30min
2/5difficulty
Done 0 of 5
Component Function Check

CHECK PARKING LAMP OPERATION

Check that the parking lamp is turned ON.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Check parking lamp circuit. Refer to Component Function Check.

CHECK FRONT SIDE MARKER LAMP OPERATION

CONSULT

  1. Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R”.

  2. While operating the test items, check that the front side marker lamp is turned ON.

    TAIL : Front side marker lamp ON
    Off : Front side marker lamp OFF

Is the inspection result normal?

YES>>

Front side marker lamp circuit is normal.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK FRONT SIDE MARKER LAMP BULB

Check applicable lamp bulb.

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace bulb.

CHECK FRONT SIDE MARKER LAMP POWER SUPPLY CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect IPDM E/R connector and front combination lamp connector.

  3. Check continuity between IPDM E/R harness connector and front combination lamp harness connector.

    Front combination lampIPDM E/RContinuity
    ConnectorTerminalConnectorTerminal
    RH E243 3 E218 90 Yes
    LH E247

Is the inspection result normal?

YES>>

GO TO 3.

NO>>

Repair or replace harness.

CHECK FRONT SIDE MARKER LAMP GROUND CIRCUIT

Check continuity between front side marker lamp harness connector and ground.

Front combination lamp—Continuity
ConnectorTerminal
RH E243 7 Ground Yes
LH E247

Is the inspection result normal?

YES>>

Check corresponding bulb socket and harness. Repair or replace if necessary.

NO>>

Repair or replace harness.