Tail Lamp Circuit
CHECK TAIL LAMP OPERATION
CONSULT
Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R”.
While operating the test items, check that the tail lamp is turned ON.
TAIL : Tail Lamp ON Off : Tail lamp OFF
Is the inspection result normal?
YES>>Tail lamp circuit is normal.
NO>>Refer to Diagnosis Procedure.
CHECK PARKING LAMP OPERATION
Check that the parking lamp is turned ON.
Is the inspection result normal?
YES>>When tail lamp RH or LH does not turn ON GO TO 2.
NO>>Check parking lamp circuit. Refer to Component Function Check.
CHECK TAIL LAMP FUSE
Ignition switch OFF.
Check that the following fuses are not blown:
Component Location Fuse No. Capacity Tail lamp RH IPDM E/R 51 10 A Tail lamp LH 52
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace the blown fuse after repairing the affected circuit.
CHECK TAIL LAMP OUTPUT VOLTAGE
CONSULT
Disconnect rear combination lamp LH (body side) connector, rear combination lamp RH (body side) connector, rear combination lamp LH (back door side) connector and rear combination lamp RH (back door side) connector.
Ignition switch ON.
Select “EXTERNAL LAMPS” in “Active Test” mode of “IPDM E/R”.
While operating the test items, check voltage between rear combination lamp LH (body side) harness connector, rear combination lamp RH (body side) harness connector, rear combination lamp LH (back door side) harness connector, rear combination lamp RH (back door side) harness connector harness connector and ground.
Body side (+) (−) Test item Voltage
(Approx.)Rear combination lamp (body side) Connector Terminal RH B459 6 Ground EXTERNAL LAMPS TAIL Battery voltage Off 0 V LH B460 TAIL Battery voltage Off 0 V Back door side (+) (−) Test item Voltage
(Approx.)Rear combination lamp (back door side) Connector Terminal RH D565 1 Ground EXTERNAL LAMPS TAIL Battery voltage Off 0 V LH D566 TAIL Battery voltage Off 0 V
Is the inspection result normal?
YES>>GO TO 6.
NO>>GO TO 4.
CHECK TAIL LAMP POWER SUPPLY (SHORT) CIRCUIT
Disconnect IPDM E/R connector.
Check continuity between IPDM E/R harness connector and ground.
(+) (−) Continuity IPDM E/R Connector Terminal E121 9 Ground No 10
Is the inspection result normal?
YES>>GO TO 5.
NO>>Repair or replace harness.
CHECK TAIL LAMP POWER SUPPLY (OPEN) CIRCUIT
Ignition switch OFF.
Check continuity between rear combination lamp LH (body side) harness connector, rear combination lamp RH (body side) harness connector, rear combination lamp LH (back door side) harness connector, rear combination lamp RH (back door side) harness connector and IPDM E/R harness connector.
Body side Rear combination lamp (body side) IPDM E/R Continuity Connector Terminal Connector Terminal RH B459 6 E121 9 Yes LH B460 10 Back door side Rear combination lamp (back door side) IPDM E/R Continuity Connector Terminal Connector Terminal RH D565 1 E121 10 Yes LH D566 9
Is the inspection result normal?
YES>>Replace IPDM E/R. Refer to Removal and Installation
NO>>Repair or replace harness.
CHECK TAIL LAMP GROUND CIRCUIT
Check continuity between rear combination lamp LH (body side) harness connector, rear combination lamp RH (body side) harness connector, rear combination lamp LH (back door side) harness connector, rear combination lamp RH (back door side) harness connector harness connector and ground.
| Rear combination lamp (body side) | — | Continuity | ||
|---|---|---|---|---|
| Connector | Terminal | |||
| RH | B459 | 7 | Ground | Yes |
| LH | B460 | |||
| Rear combination lamp (back door side) | — | Continuity | ||
|---|---|---|---|---|
| Connector | Terminal | |||
| RH | D565 | 4 | Ground | Yes |
| LH | D566 | |||
Is the inspection result normal?
YES-1>>Rear combination lamp (body side): Replace rear combination lamp (body side). Refer to Removal and Installation.
YES-2>>Rear combination lamp (back door side): Replace rear combination lamp (back door side). Refer to Removal and Installation.
NO>>Repair or replace harness.