Driver Controls

Mood Lamp Circuit

13steps
~78min
3/5difficulty
Done 0 of 13
Component Function Check
  • Battery saver output/power supply circuit

CHECK MOOD LAMP OPERATION

CONSULT

  1. Ignition switch ON.

  2. Select “SHIFT SPOT LAMP TEST” in “Active Test” mode of “BCM(INTELLIGENT KEY)”.

  3. With operating the test items, check that each mood lamp turns ON/OFF.

    On : Mood lamp ON
    Off : Mood lamp OFF

Do the mood lamps turn ON/OFF?

YES>>

Mood lamp control circuit is normal.

NO>>

Refer to Diagnosis Procedure.

Diagnosis Procedure

CHECK MOOD LAMP CONTROL OUTPUT

CONSULT

  1. Ignition switch OFF.

  2. Ignition switch ON.

  3. Select “SHIFT SPOT LAMP TEST” in “Active Test” mode of “BCM(INTELLIGENT KEY)”.

  4. With operating the test item, check voltage between BCM harness connector and ground.

(+)(–)Test item

Voltage

(Approx.)
BCM
ConnectorTerminal
M19 45 Ground SHIFT SPOT LAMP TEST ON 0 V
OFF Battery voltage

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Fixed ON. GO TO 3.

NO>>

Fixed OFF. Replace BCM. Refer to Removal and Installation.

CHECK MOOD LAMP OPEN CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect the BCM connector and front room/map lamp assembly connector.

  3. Check continuity between BCM harness connector and front room/map lamp assembly connector.

    BCMMood lampContinuity
    ConnectorTerminalConnectorTerminal
    M19 45 Front room/map lamp assembly (mood lamp) R6 2 Yes

Is the inspection result normal?

YES>>

Replace front room/map lamp assembly. Refer to Removal and Installation.

NO>>

Repair or replace harnesses.

CHECK MOOD LAMP SHORT CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect BCM connector and front room/map lamp assembly connector.

  3. Check continuity between BCM harness connector and ground.

(+)(-)Continuity
BCM
ConnectorTerminal
M19 45 Ground No

Is the inspection result normal?

YES>>

Replace BCM. Refer to Removal and Installation.

NO>>

Repair or replace harnesses.