Transmission & Driveline
Side Oil Seal
In this manual: Transmission & Driveline
~1min read

| Rear final drive assembly | Side oil seal | ||||
| Oil seal lip | |||||
REMOVAL
Drain gear oil. Refer to Draining.
Remove rear drive shafts. Refer to Removal and Installation.
Remove side oil seal, using oil seal remover (commercial service tool).

INSTALLATION
Using the drift (A) (SST: KV38100200), drive side oil seal until it becomes flush with the gear carrier end.

Install rear drive shafts. Refer to Removal and Installation.
Refill gear oil to the final drive. Refer to Refilling.
Check final drive for leaks.
Check oil level. Refer to Inspection.
Was this page helpful?