Driver Information & Multimedia

Washer Fluid Level Switch Circuit

7steps
~42min
2/5difficulty
Done 0 of 7
Diagnosis Procedure

CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT

  1. Ignition switch OFF.

  2. Disconnect combination meter harness connector and washer fluid level switch harness connector.

  3. Check continuity between combination meter harness connector and washer fluid level switch harness connector.

    Combination meterWasher fluid level switchContinuity
    ConnectorTerminalConnectorTerminal
    M24 24 E208 1 Yes
  4. Check continuity between combination meter harness connector and ground.

    Combination meter—Continuity
    ConnectorTerminal
    M24 24 Ground No

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Repair or replace harness or connector.

CHECK WASHER FLUID LEVEL SWITCH GROUND CIRCUIT

Check continuity between washer fluid level switch harness connector and ground.

Washer fluid level switch—Continuity
ConnectorTerminal
E208 2 Ground Yes

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Repair or replace harness or connector.

Component Inspection

CHECK WASHER FLUID LEVEL SWITCH

  1. Ignition switch OFF.

  2. Disconnect washer fluid level switch connector.

  3. Check washer fluid level switch.

    Washer fluid level switchConditionContinuity
    Terminals
    1 2 Washer fluid level switch ON Yes
    Washer fluid level switch OFF No

Is the inspection result normal?

YES>>

Inspection End.

NO>>

Replace washer fluid level switch. Refer to Removal and Installation.