Cold weather driving

In this manual: Cold weather driving
Air bags, seat belts and child restraints — 1Exterior front — 1Exterior rear — 1Passenger compartment — 1Instrument panel — 1Engine compartment check locations — 1Seats — 1Head restraints/headrests — 1Seat belts — 1Child safety — 1Child restraints — 1Supplemental Restraint System (SRS) — 1Instrument panel — 1Meters and gauges — 1Warning lights, indicator lights and audible reminders — 1Security systems (if so equipped) — 1Wiper and washer switch — 1Rear window defroster switch — 1Headlight and turn signal switch — 1Horn — 1Vehicle Dynamic Control (VDC) off switch — 1Power outlets — 1Storage — 1Windows — 1Interior lights — 1Keys — 1Doors — 1Remote keyless entry system (if so equipped) — 1NISSAN Intelligent Key (if so equipped) — 1Hood — 1Trunk lid — 1Fuel-filler door — 1Steering wheel — 1Sun visors — 1Mirrors — 1Control panel buttons - color screen with Navigation System (if so equipped) — 1RearView Monitor (if so equipped) — 1Vents — 1Heater and Air Conditioner (manual) — 1Servicing air conditioner — 1Audio system — 1NissanConnectSM Mobile Apps (if so equipped) — 1Car phone or CB radio — 1Bluetooth Hands-Free Phone System without Navigation System (Type A) (if so equipped) — 1Bluetooth Hands-Free Phone System without Navigation System (Type B) (if so equipped) — 1Bluetooth Hands-Free Phone System with Navigation System (if so equipped) — 1NISSAN Voice Recognition System (if so equipped) — 1Precautions when starting and driving — 1Ignition switch (if so equipped) — 1Push-button ignition switch (if so equipped) — 1Before starting the engine — 1Starting the engine (models without NISSAN Intelligent Key system) — 1Starting the engine (models with NISSAN Intelligent Key system) — 1Driving the vehicle — 1Parking brake — 1Cruise control (if so equipped) — 1Break-in schedule — 1Fuel efficient driving tips — 1Increasing fuel economy — 1Parking/parking on hills — 1Power steering — 1Brake system — 1Vehicle Dynamic Control (VDC) system (if so equipped) — 1Cold weather driving — 1Hazard warning flasher switch — 1Flat tire — 1Jump starting — 1Push starting — 1If your vehicle overheats — 1Towing your vehicle — 1Cleaning exterior — 1Cleaning interior — 1Corrosion protection — 1Maintenance precautions — 1Engine compartment check locations — 1Engine cooling system — 1Engine oil — 1Continuously Variable Transmission (CVT) fluid (if so equipped) — 14-speed automatic transmission fluid (ATF) (if so equipped) — 1Power steering fluid — 1Brake and clutch (if so equipped) fluid — 1Windshield-washer fluid — 1Battery — 1Variable voltage control system (if so equipped) — 1Drive belt — 1Spark plugs — 1Air cleaner — 1Windshield wiper blades — 1Brakes — 1Fuses — 1Battery replacement — 1Lights — 1Wheels and tires — 1Maintenance requirements — 1General maintenance — 1Explanation of scheduled maintenance items — 1Maintenance schedules — 1Standard maintenance — 1Maintenance under severe operating conditions — 1Recommended fluids/lubricants and capacities — 1Specifications — 1When traveling or registering in another country — 1Vehicle identification — 1Installing front license plate — 1Vehicle loading information — 1Towing a trailer — 1Uniform tire quality grading — 1Emission control system warranty — 1Reporting safety defects — 1Readiness for inspection/maintenance (I/M) test — 1Event Data Recorders (EDR) — 1Owner's Manual/Service Manual order information — 1
~5min read

Freeing a frozen door lock

To prevent a door lock from freezing, apply deicer through the key hole. If the lock becomes frozen, heat the key before inserting it into the key hole, or use the remote keyless entry key fob or the NISSAN Intelligent Key.

Antifreeze

In the winter when it is anticipated that the temperature will drop below 32F (0C), check the antifreeze to assure proper winter protection. For additional information, refer to "Engine cooling system" in the "Do-it-yourself" section of this manual.

Battery

If the battery is not fully charged during extremely cold weather conditions, the battery fluid may freeze and damage the battery. To maintain maximum efficiency, the battery should be checked regularly. For additional information, refer to "Battery" in the "Do-it-yourself" section of this manual.

Draining of coolant water

If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle.

For additional information, refer to "Changing engine coolant" in the "Do-it-yourself" section of this manual.

Tire equipment

1. SUMMER tires have a tread designed to provide superior performance on dry pavement.

However, the performance of these tires will be substantially reduced in snowy and icy conditions. If you operate your vehicle on snowy or icy roads, NISSAN recommends the use of MUD & SNOW or ALL SEASON TIRES on all four wheels. It is recommended that you visit a NISSAN dealer for the tire type, size, speed rating and availability information.

2. For additional traction on icy roads, studded tires may be used. However, some U.S.

states and Canadian provinces prohibit their use. Check local, state and provincial laws before installing studded tires.

Skid and traction capabilities of studded snow tires on wet or dry surfaces may be poorer than that of non-studded snow tires.

3. Tire chains may be used. For additional information, refer to "Tire chains" in the "Do-ityourself" section of this manual.

Special winter equipment

It is recommended that the following items be carried in the vehicle during winter:

  • A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades.
  • A sturdy, flat board to be placed under the jack to give it firm support.
  • A shovel to dig the vehicle out of snowdrifts
  • Extra washer fluid to refill the windshieldwasher fluid reservoir.

Driving on snow or ice

WARNING

  • Wet ice (32F, 0C and freezing rain), very cold snow or ice can be slick and very hard to drive on. The vehicle will have much less traction or "grip" under these conditions. Try to avoid driving on wet ice until the road is salted or sanded.
  • Whatever the condition, drive with caution.

    Accelerate and slow down with care. If accelerating or downshifting too fast, the drive wheels will lose even more traction.

  • Allow more stopping distance under these conditions. Braking should be started sooner than on dry pavement.
  • Allow greater following distances on slippery roads.
  • Watch for slippery spots (glare ice).

    These may appear on an otherwise clear road in shaded areas. If a patch of ice is seen ahead, brake before reaching it. Try not to brake while on the ice, and avoid any sudden steering maneuvers.

  • Do not use the cruise control (if so equipped) on slippery roads.
  • Snow can trap dangerous exhaust gases under your vehicle. Keep snow clear of the exhaust pipe and from around your vehicle.

Engine block heater (if so equipped)

Engine block heaters are used to assist with cold temperature starting.

The engine block heater should be used when the outside temperature is 20F (-7C) or lower.

WARNING

  • Do not use your engine block heater with an ungrounded electrical system or a 2-pronged adapter. You can be seriously injured by an electrical shock if you use an ungrounded connection.
  • Disconnect and properly store the engine block heater cord before starting the engine. Damage to the cord could result in an electrical shock and can cause serious injury.
  • Use a heavy-duty 3-wire, 3-pronged extension cord rated for at least 10 A. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110-VAC outlet. Failure to use the proper extension cord or a grounded outlet can result in a fire or electrical shock and cause serious personal injury.

To use the engine block heater: 1. Turn the engine off.

2. Open the hood and unwrap the engine block heater cord.

3. Plug the engine block heater cord into a grounded 3-wire, 3-pronged extension cord.

4. Plug the extension cord into a Ground Fault Interrupt (GFI) protected, grounded 110- volt AC (VAC) outlet.

5. The engine block heater must be plugged in for at least two to four hours, depending on outside temperatures, to properly warm the engine coolant. Use an appropriate timer to turn the engine block heater on.

6. Before starting the engine, unplug and properly store the cord to keep it away from moving parts.