Jump starting

In this manual: Jump starting
Air bags, seat belts and child restraints — 1Exterior front — 1Exterior rear — 1Passenger compartment — 1Instrument panel — 1Engine compartment check locations — 1Seats — 1Head restraints/headrests — 1Seat belts — 1Child safety — 1Child restraints — 1Supplemental Restraint System (SRS) — 1Instrument panel — 1Meters and gauges — 1Warning lights, indicator lights and audible reminders — 1Security systems (if so equipped) — 1Wiper and washer switch — 1Rear window defroster switch — 1Headlight and turn signal switch — 1Horn — 1Vehicle Dynamic Control (VDC) off switch — 1Power outlets — 1Storage — 1Windows — 1Interior lights — 1Keys — 1Doors — 1Remote keyless entry system (if so equipped) — 1NISSAN Intelligent Key (if so equipped) — 1Hood — 1Trunk lid — 1Fuel-filler door — 1Steering wheel — 1Sun visors — 1Mirrors — 1Control panel buttons - color screen with Navigation System (if so equipped) — 1RearView Monitor (if so equipped) — 1Vents — 1Heater and Air Conditioner (manual) — 1Servicing air conditioner — 1Audio system — 1NissanConnectSM Mobile Apps (if so equipped) — 1Car phone or CB radio — 1Bluetooth Hands-Free Phone System without Navigation System (Type A) (if so equipped) — 1Bluetooth Hands-Free Phone System without Navigation System (Type B) (if so equipped) — 1Bluetooth Hands-Free Phone System with Navigation System (if so equipped) — 1NISSAN Voice Recognition System (if so equipped) — 1Precautions when starting and driving — 1Ignition switch (if so equipped) — 1Push-button ignition switch (if so equipped) — 1Before starting the engine — 1Starting the engine (models without NISSAN Intelligent Key system) — 1Starting the engine (models with NISSAN Intelligent Key system) — 1Driving the vehicle — 1Parking brake — 1Cruise control (if so equipped) — 1Break-in schedule — 1Fuel efficient driving tips — 1Increasing fuel economy — 1Parking/parking on hills — 1Power steering — 1Brake system — 1Vehicle Dynamic Control (VDC) system (if so equipped) — 1Cold weather driving — 1Hazard warning flasher switch — 1Flat tire — 1Jump starting — 1Push starting — 1If your vehicle overheats — 1Towing your vehicle — 1Cleaning exterior — 1Cleaning interior — 1Corrosion protection — 1Maintenance precautions — 1Engine compartment check locations — 1Engine cooling system — 1Engine oil — 1Continuously Variable Transmission (CVT) fluid (if so equipped) — 14-speed automatic transmission fluid (ATF) (if so equipped) — 1Power steering fluid — 1Brake and clutch (if so equipped) fluid — 1Windshield-washer fluid — 1Battery — 1Variable voltage control system (if so equipped) — 1Drive belt — 1Spark plugs — 1Air cleaner — 1Windshield wiper blades — 1Brakes — 1Fuses — 1Battery replacement — 1Lights — 1Wheels and tires — 1Maintenance requirements — 1General maintenance — 1Explanation of scheduled maintenance items — 1Maintenance schedules — 1Standard maintenance — 1Maintenance under severe operating conditions — 1Recommended fluids/lubricants and capacities — 1Specifications — 1When traveling or registering in another country — 1Vehicle identification — 1Installing front license plate — 1Vehicle loading information — 1Towing a trailer — 1Uniform tire quality grading — 1Emission control system warranty — 1Reporting safety defects — 1Readiness for inspection/maintenance (I/M) test — 1Event Data Recorders (EDR) — 1Owner's Manual/Service Manual order information — 1
~3min read

To start your engine with a booster battery, the instructions and precautions below must be followed.

WARNING

  • If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle.
  • Explosive hydrogen gas is always present in the vicinity of the battery. Keep all sparks and flames away from the battery.
  • Do not allow battery fluid to come into contact with eyes, skin, clothing or painted surfaces. Battery fluid is a corrosive sulfuric acid solution which can cause severe burns. If the fluid should come into contact with anything, immediately flush the contacted area with water.
  • Keep battery out of the reach of children.
  • The booster battery must be rated at 12 volts. Use of an improperly rated battery can damage your vehicle.
  • Whenever working on or near a battery, always wear suitable eye protectors (for example, goggles or industrial safety spectacles) and remove rings, metal bands, or any other jewelry. Do not lean over the battery when jump starting.
  • Do not attempt to jump start a frozen battery. It could explode and cause serious injury.
  • Your vehicle has an automatic engine cooling fan. It could come on at any time. Keep hands and other objects away from it.
Jump starting

WARNING

Always follow the instructions below. Failure to do so could result in damage to the charging system and cause personal injury.

1. If the booster battery is in another vehicle, position the 2 vehicles to bring their batteries near each other.

Do not allow the 2 vehicles to touch.

2. Apply the parking brake. Move the shift lever to N (Neutral) (manual transmission) or to P (Park) (Continuously Variable Transmission)/(automatic transmission).

Switch off all unnecessary electrical systems (lights, heater, air conditioner, etc.).

3. Remove vent caps on the battery (if so equipped). Cover the battery with an old cloth to reduce explosion hazard.

4. Connect jumper cables in the sequence illustrated ( A , B , C , D ).

CAUTION

  • Always connect positive ( +) to positive (+ ) and negative (- ) to body ground (for example, strut mounting bolt, engine lift bracket, etc.) - not to the battery.
  • Make sure the jumper cables do not touch moving parts in the engine compartment and that the cable clamps do not contact any other metal.

5. Start the engine of the booster vehicle and let it run for a few minutes.

6. Keep the engine speed of the booster vehicle at about 2,000 rpm, and start the engine of the vehicle being jump started.

CAUTION

Do not keep the starter motor engaged for more than 10 seconds. If the engine does not start right away, turn the key off and wait 3 to 4 seconds before trying again.

7. After starting the engine, carefully disconnect the negative cable and then the positive cable.

8. Replace the vent caps (if so equipped). Be sure to dispose of the cloth used to cover the vent holes as it may be contaminated with corrosive acid.