Topping up, filling

The vehicle must be on level ground, with the engine stopped and cold (for example: before the first start of the day).

Before carrying out any work in the engine compartment, it is essential to switch off the ignition by pressing the engine stop button (refer to the section "starting and stopping the engine" in chapter 2).

• Unscrew cap 1;
• restore the level (for information, the capacity between the "MIN" and "MAX" marks on the dipstick 2 is 1.5 to 2 litres depending on the engine);
• wait about 10 minutes to allow the oil to drain;
• check the level using dipstick 2 (as explained previously).

Once the operation is complete, make sure to push the dipstick fully home and screw the cap on completely.

To avoid spills, we recommend using a funnel when topping up or filling the oil.

Do not exceed the "MAX" level, and do not forget to refit cap 1 and dipstick 2.