Brake fluid

The level is checked with the engine stopped and the vehicle on level ground.

Check it frequently, and in any case whenever you notice even a slight change in braking efficiency.

When working near the engine, be aware that it may be hot. The cooling fan may also start at any time.

Risk of injury.

Level 2

The level drops normally as the brake linings wear, but it must never fall below the "MIN" warning mark.

If you wish to check the wear of the discs and drums yourself, obtain the document explaining the inspection method, available from the network or on the manufacturer's website.

Topping up

Any work on the hydraulic circuit must be followed by a fluid replacement carried out by a specialist.

You must use a fluid approved by our Technical Departments (taken from a sealed container).

Replacement frequency

Refer to your vehicle's maintenance document.

If the level drops abnormally or repeatedly, consult a Brand Representative.