Front head restraints

Raising the head restraint

Pull the head restraint up to the desired height.

Check that it is properly locked.

Lowering the head restraint

Press button 1 and hold the head restraint while lowering it to the desired height.

Check that it is properly locked.

Removing the head restraint

Set the head restraint to its highest possible position (tilt the backrest backwards if necessary). Press button 1 and raise the head restraint until the catches are released.

Fitting the head restraint

Insert the head restraint posts into the guides (tilt the backrest backwards if necessary).

Push the head restraint in until it locks, then press button 1 to adjust it to the desired height.

Check that posts 2 are properly locked in the seat backrest.

Head restraints are safety-related equipment; they should always be correctly installed and adjusted in the seat backrests: the distance between the head restraint and the head should be as small as possible, and its upper part A must be as close as possible to the top of the head.