Renault Kangoo Quiz
Bodywork

Front fender

In this manual: Bodywork
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
~1min read

INTRODUCTION

Replacing this part is a basic operation for a front impact.

It is a removable body part.

M.P.R. PART COMPOSITION

Part assembled with:

  • wing side flange,

  • bumper mounting bracket.

Aile avant

Remove:

  • the plastic cover at (A) on the wing side (see chapter 55),

  • the plastic wheel arch splash guards (see chapter 55),

  • the bumper and its impact bar (see chapter 55),

  • the turn signal repeater,

  • front wing: 8 hex-head bolts Ø 6 mm and one Torx screw Ø 6 mm.

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.