Renault Kangoo Quiz
Bodywork

Headlamp mounting panel

In this manual: Bodywork
Renault Kangoo Driver's Manual — 100Mechanisms and accessories — 44Mechanisms and Accessories — 7Diagnostic — 61Bodywork — 85Electrical equipment — 31Engine and peripherals — 88Bodywork — 24Chassis — 56Renault Kangoo 2 Electric Owner's Manual — 21Transmission — 14Air conditioning — 26General vehicle information — 24Sealing and soundproofing — 1Trim and upholstery — 1
7steps
~42min
2/5difficulty
Done 0 of 7

INTRODUCTION

Replacing this part is a basic operation for a front impact.

Use of the alignment jig is essential.

PART COMPOSITION M.P.R.

Part assembled with hood hinge bracket.

Tôle porte-phare

LINKED WITH:

Front side member, front section
Front cradle bracket
Cowl side panel (footwell)
Upper cowl side reinforcement

PARTS CONCERNED (thickness in mm):

  1. Headlamp support panel 1

  2. Front side member front section 1.5

  3. Front cradle bracket 1.5

  4. Cowl side panel (footwell) 1

  5. Upper cowl side reinforcement 1

  6. Front lower crossmember end 1.5

  7. Bonnet hinge bracket 1.5

    Tôle porte-phare
    Tôle porte-phare
    Tôle porte-phare
    Tôle porte-phare
    Tôle porte-phare
    Tôle porte-phare
    Tôle porte-phare
    Côté d’auvent (doublure de pied) partiel

Test yourself

A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.