Lower aperture crossmember

INTRODUCTION

Replacing this part is a complementary operation to replacing the:

• wheel arch with wing side for a frontal collision,

• front pillar with inner panel for a side collision.

This operation can be carried out partially (see sectional drawing and method below).

In the operation below, you will only find descriptions of the connections specific to the part concerned.

The M.P.R. supplies the lower windscreen frame crossmember (1) without the steering column support (2), which must be ordered separately.

Information on other parts is covered in their respective sections.

PART COMPOSITION M.P.R.

1 Windscreen frame crossmember

Part assembled with:

• steering column support extension,

• lower windscreen frame crossmember reinforcement.

2 Steering column support

Part only.

LINKED WITH:

Dash panel
Lower windscreen frame crossmember
Lower windscreen frame crossmember reinforcement
Steering column support extension
Steering column support
Wing side (pillar inner panel)
Wiper support

PARTS CONCERNED (thickness in mm):

1. 1

   Dash panel 1

2. 2

   Lower windscreen frame crossmember 1.2

3. 3

   Lower windscreen frame crossmember reinforcement 1.2

4. 4

   Steering column support extension 1.5

5. 5

   Steering column support 2

6. 6

   Cowl side panel (footwell) 1.5

7. 7

   Wiper support 1.5