Bulkhead

INTRODUCTION

The replacement of this part is a complementary operation to the replacement of:

1 - for a frontal collision:

• of the wheel arch with wing side,

• of the heater bulkhead,

2 - for a side collision:

• of the front pillar with inner panel,

• of the lower windscreen frame crossmember,

• of the heater bulkhead.

This part can be partially replaced (see section drawing and procedure below).

In the operation below, you will only find descriptions of the connections specific to the part concerned.

Information on other parts is covered in their respective sections.

PART COMPOSITION M.P.R.

Part assembled with:

• wiper support,

• wiper support reinforcement.

LINKED WITH:

Floor panel
Wiper support
Wiper motor support,
Door aperture pillar
Door aperture pillar inner panel
Front side crossmember

PARTS CONCERNED (thickness in mm):

1. 1

   Dash panel 0.7

2. 2

   Floor panel 0.8

3. 3

   Wiper motor bracket 1.5

4. 4

   Door aperture pillar 1

5. 5

   Door aperture pillar inner panel 1

6. 6

   Rear side member front section 2.5

7. 7

   Front side crossmember 1

8. 8

   Front pillar 0.8