Heater partition

INTRODUCTION

Replacing this part is a complementary operation to replacing the:

• wheel arch for a frontal collision,

• wing side for a side collision.

This operation can be carried out partially (see sectional drawing and method below).

The M.P.R. only supplies bulkheads (1) of the "air conditioning" type. Consequently, the closing sheet metal (2) must be ordered separately.

In the operation below, you will only find descriptions of the connections specific to the part concerned.

Information on other parts is covered in their respective sections.

PART COMPOSITION M.P.R.

1 Heater bulkhead

Part assembled with:

• bonnet lock support,

• wiper motor support.

2 Bulkhead closing panel.

LINKED WITH:

Wheel arch
Injection unit and crash sensor support (left side)
Dash panel
Pillar inner panel (wing side)
Lower windscreen frame crossmember

PARTS CONCERNED (thickness in mm):

1. 1

   Heater bulkhead 1

2. 2

   Shock tower extension 1

3. 3

   Shock absorber top mount 2

4. 4

   Injection unit and crash sensor bracket (left side) 2

5. 5

   Dash panel 1

6. 6

   Cowl side panel (footwell) 1.5

7. 7

   Wiper support 1.5

8. 8

   Lower windscreen frame crossmember 1.2