Receiver-drier
REMOVAL
Drain the R134a refrigerant circuit using the recharging station.
Remove:
the two upper radiator mounting bolts,
the two bolts securing the pipes to the receiver-drier.
Move the radiator-condenser assembly slightly back.
Through the bumper cover, remove the two bolts (1) securing the receiver-drier to the condenser.

Remove the receiver-drier from underneath the vehicle.
Fit plugs to every port to prevent moisture entering the components.
INSTALLATION
Reverse the removal procedure.
Check the condition of the seals and lubricate them with P.A.G. SP 10 oil.
Evacuate the system, then charge the R134a refrigerant circuit using the recharging station.
When replacing the receiver-drier, add 15 ml of P.A.G. SP 10 oil to the circuit.
NOTE: screw tightening torque (2): 1.2 daN.m
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.