Condenser
REMOVAL
A lift is not required.
Drain the R134a refrigerant circuit.
Disconnect the battery.
Remove:
the plastic air deflector located on the upper crossmember,
the seal (1),
the upper crossmember (2),
the mounting bolt (3),
the two R134a refrigerant pipes (4) (fit plugs to prevent moisture entering),
the two upper radiator mounting bolts.

Move the radiator-condenser assembly as far back as possible towards the engine.
Remove the four condenser mounting bolts (6) from the radiator.
Carefully remove the condenser.

INSTALLATION
Refit in the reverse order of removal.
Check the condition of the seals.
Evacuate the system, then charge the R134a circuit using the recharging station.
IMPORTANT
When replacing the condenser, add 30 ml of P.A.G. SP 10 oil to the circuit.
NOTE: tightening torque of bolts (6): 0.8 daN.m.
Test yourself
A quick Renault Kangoo quiz: every answer comes with an explanation and a link to the manual page.