Load cover

REMOVAL

Remove the shelf.

Release the two catches (A).

Remove the centre shelf.

Remove:

• the clips (B), using the trim removal tool,
• the partition.

Remove the screws (C).

Loosen screw (D) without removing it.

Release the side hoops.

Remove the screws (E).

Partially release the parcel shelf.

Disconnect the luggage compartment light.

Remove the shelf.

Remove the screws (F).

Lift the tray slightly.

Release the triangular part (1).

Remove:

• the screws (G),
• the spare wheel well cover.

Remove the tray through the tailgate opening, bending it slightly.

Remove the two side trim panels.

Remove the sound insulation.

Remove the screws (H).

Unclip the floor from the seat fixing clips.

Remove the sheet metal floor. This operation requires two technicians.

Release the load stop support (2).

Insert a screwdriver into the hole (I).

Release the clip by applying pressure on the screwdriver.

Gently pull the carpet aside.

Remove the load stop tabs (J).

INSTALLATION

Tighten the fixings to torque.

Refit in the reverse order of removal.