Renault Megane Quiz
Trim and upholstery

Rear wing trim

In this manual: Trim and upholstery
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

TIGHTENING TORQUE (in N.m)
Seat belt rail fixing bolt 21

REMOVAL

IMPORTANT: For a vehicle fitted with rear side airbags, before starting to remove the rear wing trim, the airbag ECU must be disabled using the diagnostic tool (see chapter 88C).
Garniture d'aile arrière

Unclip the front sill trim (1).

Garniture d'aile arrière

Remove:

  • the bench seat base,
  • the screw (A).

Release the seat belt strap retaining rail.

Garniture d'aile arrière

Remove the screw (B).

Remove the trim (2).

Garniture d'aile arrière

For a vehicle fitted with rear side airbags: remove the two screws (C).

Release the trim.

INSTALLATION

Refit in the reverse order of removal.

Tighten the seat belt rail fixing bolt to torque (21 N.m).

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.