Quarter trim (3-door version)

TIGHTENING TORQUE (in N.m)
Rear seat belt lower mounting bolt and rail	21

REMOVAL

IMPORTANT: For a vehicle fitted with rear side airbags, before starting to remove the rear wing trim, the airbag ECU must be disabled using the diagnostic tool (see chapter 88C).

Remove the rear parcel shelf.

Remove the screws (A).

Partially release the parcel shelf.

Disconnect the luggage compartment light connector.

Unclip the upper trim

Unclip the front sill trim (1).

Remove the seat belt rail bolt (B).

Remove the screw (C).

Unclip the rear wing trim (2).

For a vehicle fitted with rear side airbags: remove the two screws (C).

Remove the rear wing trim.

Partially release the door seal.

Unclip the lower retaining clips (D).

Release:

• the trim (3) and (4),
• the seat belt webbing through the opening (E).

Remove the lower seat belt anchorage (F).

Partially release the luggage compartment seal.

Unclip the quarter trim (5).

Release:

• the trim (6),
• the seat belt webbing through the opening (G).

REFITTING: Carry out the removal procedure in reverse.

Tighten the rear seat belt lower anchorage and rail bolts to torque (21 N.m).