Renault Megane Quiz
Trim and upholstery

Quarter trim (5-door version)

In this manual: Trim and upholstery
Engine and peripherals — 141Chassis — 79Chassis — 72Renault Mégane III Driver's Manual — 87Electrical equipment — 221Engine and peripherals — 47Electrical equipment — 80Transmission — 14Air conditioning — 30Bodywork — 115Trim and upholstery — 44General vehicle information — 27Air conditioning — 59General vehicle information — 16Transmission — 38Sealing and soundproofing — 7General vehicle information — 3
~1min read

TIGHTENING TORQUE (in N.m)
Rear seat belt lower mounting bolt 21

REMOVAL

IMPORTANT: For a vehicle fitted with rear side airbags (see illustration below), before starting to remove the trim, the airbag ECU must be disabled using the diagnostic tool (see chapter 88C).
Garniture de custode (version 5 portes)

Slide the front seat forward.

Garniture de custode (version 5 portes)

Unclip the trim at the upper part (1).

Remove the trim (2).

Garniture de custode (version 5 portes)

Remove the rear seat cushion.

Unclip clip (A) using a trim clip removal tool.

Unclip the trim (3) and (4).

Garniture de custode (version 5 portes)

Unclip the trim (5).

Garniture de custode (version 5 portes)

Remove the seat belt lower mounting bolt (B).

Garniture de custode (version 5 portes)

Remove the screws (C).

Partially release the parcel shelf.

Disconnect the luggage compartment light connector.

Garniture de custode (version 5 portes)

Unclip the trim (6).

Release:

  • the trim (7),
  • the seat belt webbing through the opening (D).

INSTALLATION

Refit in the reverse order of removal.

Tighten the rear seat belt lower mounting bolts to torque (21 N.m).

Test yourself

A quick Renault Megane quiz: every answer comes with an explanation and a link to the manual page.