Automatic Reverse

If the window detects any obstruction during automatic closing, it will stop and lower approximately 12 inches (30 cm) so that the object can be cleared.

If the window detects resistance while the power window switch is continuously pulled up, the window will stop moving up and then lower approximately 1 inch (2.5 cm).

If the power window switch is again continuously pulled up within 5 seconds after the window has lowered by the automatic reverse function, the automatic reverse function will not operate.

Information

The automatic reverse function is active only when the "Auto Up" function is used by fully pulling the switch to the second detent.

WARNING

Before closing, make sure that body parts or other objects are clear of the window to avoid injury or damage to the vehicle.

Objects less than 0.16 inch (4 mm) in diameter caught between the window glass and the upper window channel may not be detected by the automatic reverse function, and the window will not stop or reverse.

NOTICE

Do not install any accessories on the windows. The automatic reverse function may not operate.