Front Door Module Repair Procedures

Replacement

1. 1
   Remove the front door window glass. (Refer to Front Door - "Front Door Window Glass")
2. 2
   Remove the front door outside handle. (Refer to Front Door - "Front Door Outside Handle")
3. 3
   Loosen the front door outside handle base mounting screw (A).

   

4. 4
   Disconnect the outside rear view mirror connector (A).

   

5. 5
   Loosen the front door latch mounting screws (A).
6. 6
   After loosening the mounting bolts, remove the front door module (B). Tightening Torque: Bolt: 6.9 ~ 10.8 N·m Screw: 3.9 ~ 5.9 N·m

   

7. 7
   Disconnect the connectors and wire harness of the front door module (A).

   

8. 8
   Remove the front door lock assembly. (Refer to Front Door - "Front Door Latch")
9. 9
   Remove the front speaker. (Refer to Body Electrical System - "Speakers")
10. 10
    Remove the front power window motor. (Refer to Body Electrical System - "Power Window Motor")
11. 11
    Install in the reverse order of removal.

    Apply a sufficient amount of grease to the moving parts. Check that the connectors are connected correctly and that each rod is securely connected. Make sure the door locks/unlocks and opens/closes properly.