Rear Stabilizer Bar Repair Procedures

Replacement

1. 1
   Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the wheel cap (A).

   

   Be careful not to damage the wheel cap (A) when removing it.

3. 3
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 88.3 ~ 108 N·m

   

   Be careful not to damage the hub bolts when removing the front wheel and tire (A).

4. 4
   Loosen the nut and remove the rear stabilizer bar link (B) from the rear carrier.

   Tightening Torque: 78.5 ~ 98 N·m

   

5. 5
   Loosen the mounting bolt and remove the stabilizer bar from the rear subframe.

   Tightening torque: 44.1 ~ 54 N·m

   

   

Inspection

1. 1
   Check the rear stabilizer bar for deformation.
2. 2
   Check the ball joint of the rear stabilizer link for damage.