Lower Arm Repair Procedures

Replacement

1. 1
   Raise the vehicle and make sure it is securely supported.
2. 2
   Remove the wheel cap (A).

   

   Be careful not to damage the wheel cap (A) when removing it.

3. 3
   Remove the front wheel and tire (A) from the front hub.

   Tightening torque: 88.3 ~ 108 N·m

   

   Be careful not to damage the hub bolts when removing the front wheel and tire (A).

4. 4
   Disconnect the rear wheel speed sensor connector (A).

   

5. 5
   Disconnect the parking brake cable clip (A) and remove the parking brake cable (B).

   

6. 6
   Loosen the nut (A) and bolt (B) of the wheel speed sensor cable bracket, then separate the cables from the trailing arm. Tightening torque: A: 6.8 - 10.7 N·m B: 8.8 - 13.7 N·m

   

7. 7
   Loosen the trailing arm mounting nut (A) and remove the trailing arm (B).

   Tightening torque: 98.1 ~ 118 N·m

   

8. 8
   Loosen the mounting bolt and remove the trailing arm from the body.

   Tightening torque: 98.1 ~ 118 N·m

   

9. 9
   Installation is the reverse of removal.