Storing Memory Positions

1. Make sure the shift lever is in P (Park) when the ignition switch is in the ON position.

2. Adjust the driver's seat position, side mirror position and instrument panel brightness to the positions that are comfortable for the driver.

3. Press the SET button. The system will beep once and the LCD will display "Press the button to save settings."

4. Press and hold one of the memory buttons (1 or 2) for 5 seconds. The system will beep twice when the memory has been stored successfully.

5.

The LCD will display the message "Driver 1 (or 2) settings saved."

Recalling Memory Positions

1. Make sure the shift lever is in P (Park) when the ignition switch is in the ON position.

2. Press the desired memory button (1 or 2). The system will sound one beep, and then the driver's seat position, outside mirror positions, and instrument panel illumination brightness will automatically adjust to the stored positions.

3. "Driver 1 (or 2) settings applied" will appear on the LCD display.

NOTICE

• While recalling memory position "1", pressing the SET or 2 button temporarily stops the adjustment of the recalled memory position. Pressing the 2 button recalls memory position "2".
• While recalling memory position "2", pressing the SET or 1 button temporarily stops the adjustment of the recalled memory position. Pressing the 1 button recalls memory position "1".
• When recalling stored positions, pressing any of the control buttons for the driver's seat, outside mirrors, or instrument panel illumination will stop the movement of that component and move it in the direction of the pressed control button.