Cmp sensor removal and installation

1. 1
   Remove the air cleaner box. Refer to “air cleaner box removal and installation” in section 1d .
2. 2
   Remove the pair control solenoid valve. Refer to “pair control solenoid valve removal and installation” in section 1b .
3. 3
   Disconnect the coupler (1) and remove the cmp sensor (2).

   

Install the cmp sensor in the reverse order of removal.

Pay attention to the following points:

Caution when installing the cmp sensor, make sure to clean the sensor surface.

• Tighten the cmp sensor bolt (1) to the specified torque.

Refer to “ckp sensor inspection” in section 1h .