Stp sensor removal and installation

1. 1
   Remove the throttle body. Refer to “throttle body removal and installation” in section 1d (page 1d- 10).
2. 2
   Remove the stp sensor (1) with the special tool.

Special tool
: 09930–11950 (torx wrench (5 mm))

prior to disassembly, mark the stp sensor’s original position with a paint or scribe for accurate reinstallation.

Install the stp sensor in the reverse order of removal.

Refer to “throttle body disassembly and assembly” in section 1d .

Refer to “dtc “c28” (p1655): secondary throttle valve actuator (stva) malfunction” in section 1a (page 1a- 75).