Tp sensor removal and installation

Refer to “throttle body disassembly and assembly” in section 1d .

1. 1
   Remove the throttle body. Refer to “throttle body removal and installation” in section 1d (page 1d- 10).
2. 2
   Remove the tp sensor (1) with the special tool.

Special tool : 09930–11950 (torx wrench (5 mm))

prior to disassembly, mark the tp sensor’s original position with a paint or scribe for accurate reinstallation.

Install the tp sensor in the reverse order of removal.

Refer to “throttle body disassembly and assembly” in section 1d .