Engine
Water hose inspection
In this manual: Engine
3steps
~18min
2/5difficulty
Done 0 of 3
Inspect the water hoses in the following procedures:
- remove the side cowlings. Refer to “exterior parts removal and installation” in section 9d (page 9d- 6).
- Check the water hoses for crack, damage or engine coolant leakage. If any defect is found, replace the water hose with a new one.
- Any leakage from the connecting section should be corrected by proper tightening. Refer to “water hose routing diagram” .



- After finishing the water hoses inspection, reinstall the removed parts.
Test yourself
A quick Suzuki GSX-R 1000 quiz: every answer comes with an explanation and a link to the manual page.
Was this page helpful?