Toyota 4Runner Quiz
Audio / Visual / Telematics

HD Radio Tuner Malfunction (B1551,B15A0,B15AD,B15B0,B15B3,B15B4,B15B7)

In this manual: Audio / Visual / Telematics
General — 25Audio / Visual / Telematics — 283Brake — 187Drivetrain — 204Power Source / Network — 79Steering — 76Suspension — 130Vehicle Exterior — 391Vehicle Interior — 693
~1min read
DESCRIPTION

These DTCs are stored when a malfunction occurs in the navigation receiver assembly.

DTC No.

DTC Detection Condition

Trouble Area

B1551

When one of the conditions below is met:

  • "HD Radio" tuner decoder malfunction
  • "HD Radio" tuner audio output section malfunction
  • "HD Radio" tuner decoder RF/IF malfunction

Navigation receiver assembly

B15A0

When either condition below is met:

  • Bus malfunction
  • EEPROM error

B15AD

When one of the conditions below is met:

  • A short to ground, short to +B or open occurs in the gyro signal circuit
  • Gyro sensor malfunction
  • GPS receiver malfunction

B15B0

Picture circuit (TFT unit) malfunction

B15B3

When one of the conditions below is met:

  • AM tuner PLL is unlocked
  • FM tuner PLL is unlocked
  • Tuner malfunction

B15B4

When one of the conditions below is met:

  • Mechanism drive signal malfunction
  • Load/Eject malfunction
  • Read mechanism malfunction
  • Mechanical malfunction

B15B7

"Bluetooth" module malfunction
CAUTION / NOTICE / HINT

NOTICE:

After replacing the navigation receiver assembly of vehicles subscribed to pay-type satellite radio broadcasts, registration of the XM radio ID is necessary.

PROCEDURE

  1. CHECK DTC

(a) Clear the DTCs (See page ).


(b) Recheck for DTCs and check if the same DTC are output again.

OK:

No DTCs are output.


OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE NAVIGATION RECEIVER ASSEMBLY

Test yourself

A quick Toyota 4Runner quiz: every answer comes with an explanation and a link to the manual page.