Removal

1. REMOVE GENERATOR ASSEMBLY

(a) Remove the generator assembly (See page
).

2. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

3. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY

(a) Remove the bolt and disconnect the discharge hose from the cooler compressor.

(b) Remove the O-ring from the discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

4. DISCONNECT SUCTION HOSE SUB-ASSEMBLY

(a) Remove the 2 bolts and disconnect the suction hose from the cooler compressor.

(b) Remove the O-ring from the suction hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

5. REMOVE COOLER COMPRESSOR ASSEMBLY

(a) Disconnect the connector.

(b) Remove the 3 bolts and nut.

(c) Remove the stud bolt and cooler compressor.