Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable some systems need to be initialized after the cable, is reconnected (See page ).

2. REMOVE REAR NO. 1 FLOOR STEP COVER (w/ Rear No. 2 Seat)

3. REMOVE QUARTER SCUFF PLATE INNER RH (w/ Rear No. 2 Seat)

4. REMOVE REAR DOOR SCUFF PLATE RH

5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

6. REMOVE OUTER LAP BELT ANCHOR COVER

7. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER (w/o Deck Board)

8. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Deck Board)

9. REMOVE NO. 2 LUGGAGE COMPARTMENT TRIM COVER (w/ Deck Board, w/o Rear No. 2 Seat)

10. REMOVE NO. 2 DECK BOARD SUB-ASSEMBLY (w/ Deck Board)

11. REMOVE REAR NO. 2 FLOOR BOARD ASSEMBLY (w/ Deck Board)

12. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH (w/ Deck Board)

13. REMOVE LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH (w/ Deck Board)

14. REMOVE DECK BOARD ASSEMBLY (w/ Deck Board)

15. REMOVE INNER FLOOR SIDE RAIL SUB-ASSEMBLY (w/ Deck Board)

16. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE

17. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Deck Board)

18. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

19. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

20. REMOVE FRONT DECK SIDE TRIM COVER RH

21. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM COVER

22. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

23. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY

(a) Disconnect the 4 connectors.

(b) Remove the 3 bolts.

(c) Detach the 2 claws and remove the stereo component amplifier.