Removal

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page ).

2. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH

3. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH PANEL GARNISH

4. REMOVE HEATER CONTROL ASSEMBLY

5. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for VF2A)

7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

8. REMOVE NO. 2 CONSOLE BOX RETAINER

9. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/ Climate Control Seat System)

10. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Climate Control Seat System)

11. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY

(a) Detach the 2 claws to remove the No. 1 stereo jack adapter assembly. Text in Illustration *A w/o Climate control seat system *B w/ Climate control seat system